How to Change a Tire Toyota Corolla
If you find yourself stranded on the side of the road with a flat tire, don’t panic. You can easily change your Toyota Corolla’s tire yourself. All you need is a jack and a lug wrench.
- Pull over to a safe area and turn on your hazard lights
- Loosen the lug nuts with a lug wrench by turning them counterclockwise
- Lift the tire off the ground using a jack
- Place the spare tire on the wheel and hand-tighten the lug nuts as much as possible
- Lower the car back down to the ground and finish tightening the lug nuts with the lug wrench in a clockwise motion until they are tight
How to change tyre of Toyota Corolla
How to Remove Spare Tire Toyota Corolla
If you have a Toyota Corolla, you may be wondering how to remove the spare tire. Here are some instructions that should help.
First, open the trunk and locate the release knob.
This is usually located near the bottom of the trunk on the left side. Turn the knob counterclockwise to release the latch and swing the trunk lid up.
Next, locate the black plastic cover over the spare tire.
There will be four clips holding it in place – two in front and two in back. Use a flathead screwdriver or something similar to pry these clips up and off so you can remove the cover.
Once the cover is removed, you’ll see an access hole in which there is a metal rod with a handle on one end.
This is called the “tire jack.”
Credit: www.tricountytoyota.com
How Do You Take a Tire off a Toyota Corolla?
Assuming you need to change a tire:
1. Park your Toyota Corolla on a flat surface and set the parking brake. Place chocks in front of and behind the rear tires to prevent the car from rolling while you work.
2. Loosen each lug nut about one turn with a wrench, but don’t remove them yet.
3. Use a jack to lift the car up until the flat tire is clear of the ground, then finish loosening and removing the lug nuts and wheel.
4. Put the spare tire on, making sure that the valve stem is pointing up, then hand-tighten each lug nut as much as possible.
5. Lower the jack until the spare is touching the ground, then use your wrench to tighten each lug nut as much as possible in a star pattern (loosen one turn, then move to the next Lugnut in a star pattern aroundthe wheel until all are loose). Finish by tightening each lug nut another quarter turn with your wrench.
How Do You Change a Tire on a 2019 Toyota Corolla?
If you find yourself with a flat tire on your 2019 Toyota Corolla, don’t worry! Changing a tire is a relatively easy process that anyone can do. Just follow these simple steps and you’ll have your Corolla back on the road in no time.
1. Park your car in a safe location away from traffic. Make sure to set your parking brake and put your gearshift into “Park.”
2. Loosen the lug nuts on the flat tire using a lug wrench.
Do not remove them completely – just loosen them enough so they can be removed by hand later on.
3. Place the jack under the car near the flat tire. Use the jack to raise the car until the flat tire is lifted off of the ground.
4. Remove the lug nuts and then pull the flat tire off of the wheel hub. Be careful not to scratch or damage either one while doing this!
Can I Replace a Tire Myself?
It is not recommended that you replace a tire yourself. While it is possible to do so, it is much safer and easier to have a professional do it for you. There are many things that can go wrong when replacing a tire, and it is best to leave it to someone who knows what they are doing.
How Do You Change a Tire Step by Step?
Assuming you don’t have a roadside assistance plan or someone to call to do it for you, changing a tire is not as difficult as it may seem. You will need a few tools, including a jack and a lug wrench (which is usually provided in the trunk of your car with the spare tire). Here are the steps:
1. Park your car on level ground and turn on your hazard lights.
2. Loosen the lug nuts on the wheel that needs to be changed with your lug wrench (but don’t remove them yet).
3. Place your jack under the car at the point where it meets the frame (consult your owner’s manual if you’re unsure where this is).
4. Pump the jack handle until the wheel is raised off the ground.
5. Remove the Lug Nuts and pull the wheel off.
6. Put on the Spare Tire and hand-tighten each Lug Nut as much as possible.
7. Lower The Car back down and use your Lug Wrench to fully tighten each Lug Nut (in a star pattern).
8. Double check that everything is tight before driving away!
Conclusion
It’s inevitable. Sooner or later, you’ll have a flat tire. It happens to everyone, even the most experienced drivers.
But don’t worry, changing a tire is actually quite easy, and it’s something that every driver should know how to do. Here’s a step-by-step guide on how to change a tire on a Toyota Corolla.
Step 1: Prepare Your Vehicle
First things first, you need to make sure your vehicle is in the right position. If you’re on the side of the road, pull over as far as possible and turn on your hazard lights. If you’re in a parking lot or garage, find an empty spot where you can work without blocking traffic.
Once your car is in position, put it in park (or engage the emergency brake) and turn off the engine.
Step 2: Loosen The Lug Nuts
The next step is to loosened the lug nuts that hold the wheel in place.
You’ll need a wrench for this – most Toyotas come with one in the trunk, but if yours doesn’t have one or you can’t find it, any wrench will do. Place the wrench on one of the lug nuts and turn it counterclockwise until it’s loose enough to remove by hand (don’t remove it all the way). Repeat this process for each of the remaining lug nuts until they are all loose enough to remove by hand.
