How to Cut Wheel Wells for Bigger Tires

One way to make your truck or SUV look more aggressive is to install bigger tires. But you can’t just put any old tire on there–you need to make sure the wheel wells are properly cut out to accommodate the new, larger size. Here’s a quick guide on how to do just that.

First, you’ll need to measure the width and height of your new tires. Once you have those measurements, mark out the same dimensions on your wheel wells with a piece of chalk or a marker. It’s important to be as precise as possible here so that your cuts are clean and even.

Next, use a Sawzall or other cutting tool to carefully make the cuts along your marked lines. If everything goes according to plan, you should now have nice, big openings in your wheel wells that will allow you to fit those new tires with no problem!

Cutting truck fenders (to make more tire clearance)

  • Decide how much extra space you need for your tires
  • Cut along the wheel well lip using a saw or other cutting tool
  • Make sure to leave enough room so that the tire doesn’t rub against the body of the car when turning
  • Use a file or sandpaper to smooth out any rough edges

How to Widen Wheel Wells

If you’re looking to widen your wheel wells, there are a few things you’ll need to do. First, you’ll need to measure the width of your current wheel wells. Next, you’ll need to find a material that is wide enough to cover the area you want to widen.

Finally, you’ll need to attach the material to your vehicle in a way that will allow it to withstand the elements and driving conditions. Measuring Your Wheel Wells The first step in widening your wheel wells is measuring them.

You’ll need to know how wide they currently are so that you can find a material that is wide enough to cover the area you want to widen. To measure your wheel wells, use a tape measure or ruler. Measure from one side of the well to the other, making sure to take into account any curves or dips in the well.

Once you have your measurement, write it down so that you can reference it later when choosing a material. Choosing A Material

How to Cut Wheel Wells for Bigger Tires


How Do You Cut Wheel Wells for Bigger Tires?

If you’re planning on fitting bigger tires to your car, you’ll need to cut out the wheel wells to accommodate them. It’s not a difficult job, but it’s one that needs to be done carefully. Here’s a step-by-step guide to cutting wheel wells for bigger tires:

1. Measure the width of your tires and compare it to the width of the existing wheel well. You’ll need to make sure that the new tire will fit comfortably inside the well without rubbing against the sides. 2. Use a pencil or marker to mark out where you’ll need to make your cuts.

Make sure that you give yourself enough room on either side of the tire so that it can turn freely without hitting anything. 3. Cut along your lines using a sharp knife or saw. Start at one end and work your way slowly and carefully towards the other.

If you’re using a saw, be extra careful not to damage any surrounding areas while you’re working. 4. Test fit your new tire inside the well once you’ve made your cuts. If everything looks good, then you’re ready to start driving with your new setup!

How Do You Enlarge a Wheel Well?

If you want to enlarge a wheel well, there are a few things you can do. First, you can use a bigger wheel. This will give you more clearance and allow for a larger tire.

Second, you can use spacers to push the wheel out further from the hub. This will also give you more clearance and allow for a larger tire. Finally, you can cut away part of the fender or bodywork around the wheel well.

This will give you the most clearance but may not be legal in some racing sanctioning bodies.

How Do You Cut a Wheel Well Liner?

If you’re looking to cut a wheel well liner, there are a few things you’ll need to take into consideration. First, you’ll need to decide what type of liner you want to use. There are two common types of liners: pre-molded and universal.

Pre-molded liners are made specifically for your vehicle, so they fit perfectly and don’t require any trimming. Universal liners are less expensive but require some customizing to fit your vehicle. Once you’ve selected the type of liner you want, it’s time to start cutting.

If you’re using a pre-molded liner, simply follow the outline of the wheel well with a sharp knife or razor blade. If you’re using a universal liner, trace the outline of the wheel well onto the liner and then cut along that line. No matter which type of liner you’re using, be sure to take your time and make straight, clean cuts.

Once the liner is installed, any imperfections will be visible. So take your time and get it right!

How Do You Cut a Fender?

Assuming you would like to know how to cut a fender on a car: There are a few reasons why you might want to cut your fenders. Maybe you’re going for that rat rod look, or maybe you’re just trying to fit wider tires on your ride.

Whatever the reason, cutting your own fenders is not as difficult as it may seem. Here’s a step-by-step guide on how to do it. 1. Park the car on a level surface and pop the hood.

Disconnect the negative battery terminal to avoid any accidents. 2. Using a measuring tape, mark where you want to make your cut. It’s best to err on the side of caution and make your markings a bit further away from the edge of the fender than you think you need – you can always trim off more later if necessary.

Use chalk or something else that will easily wipe off so as not to damage the paint job. 3. Drill pilot holes at each end of your markings using a 3/16″ drill bit. These pilot holes will help prevent the saw blade from wandering as you make your cuts.

4a). If you have access to an air compressor and an air-powered cutoff tool, this is by far the easiest way to make clean, straight cuts in metal. Put on safety goggles and ear protection, then attach the cutoff toolto the air hose and turn it on full blast.

Line up the blade with your pilot holes and start cutting! 4b). If you don’t have access to an air compressor, don’t worry – there are other ways to get the job done ( albeit not quite as easily).

You can use either an electric handheld cutoff tool or even just a good ol’ fashioned handsaw – whichever you feel more comfortable with. Just be extra careful when making your cuts so as not to damage anything else on the car ( like wires or hoses that might be hidden behind the fender ). And again, go slowly at first until you get a feel for how deep of a cut you need to make . . . it’s better to have too little material removed than too much! 5). Once all four cuts are made, gently bend back the flap of metal created by each cut until it breaks off completely . This will give you nice clean edges without any sharp corners or jaggedness . 6).


Do you want to install bigger tires on your truck but don’t know how to cut the wheel wells? Don’t worry, it’s not as difficult as it sounds. With a few simple tools, you can easily cut the wheel wells of your truck to make room for bigger tires.

Here’s what you’ll need: – A power drill with a metal cutting bit – A jigsaw with a metal cutting blade

– A sheet of sandpaper – Safety goggles and gloves First, mark the area that you need to cut with a pencil.

Then, put on your safety goggles and gloves and start drilling holes along the line that you marked. Once you’ve drilled all of the holes, switch to the jigsaw and start cutting along the line. Be sure to go slowly and carefully so that you don’t accidentally damage anything else on your truck.

Finally, use the sandpaper to smooth out any rough edges.

David V. Williamson

Click Here to Leave a Comment Below 0 comments

Leave a Reply: