How To Mount Mobile Home Tires

If you have a mobile home, sooner or later you will need to know how to mount mobile home tires. This is not a difficult task, but it does require some special equipment and knowledge.

  • Park the mobile home on level ground and set the emergency brake
  • Chock the wheels to prevent the mobile home from rolling while you’re working
  • Place a jack under the frame of the mobile home and raise it up until the tire is off the ground
  • Remove the old tire by loosening the lug nuts with a wrench and pulling it off the wheel
  • Be careful not to damage the wheel in the process
  • Clean any dirt or debris from the wheel before mounting a new tire onto it
  • 6 Lower the mobile home back down to the ground and remove chocks from the wheels
  • 7 Tighten each lugnut by hand as much as possible before using a wrench to finish tightening them
How to Mount Mobile Home Tires


How Do You Put Tires on a Mobile Home Rim?

Tires are an important part of any mobile home, as they provide support and stability to the entire structure. While most mobile homes come equipped with tires that are specifically designed for their size and weight, there may be times when you need to replace one or more of them. In such cases, it is important to know how to put tires on a mobile home rim correctly in order to avoid any damage to the home or its contents.

The first step is to identify the right size tire for your mobile home. This will typically be listed in the owner’s manual, although you can also find this information by measuring the existing tires. Once you have the correct size, purchase a new tire that matches as closely as possible.

It is also a good idea to get a second opinion from a professional before making your purchase. With the new tire in hand, head over to where the old tire is located in the mobile home. You will likely see four bolts holding it in place – two on each side of the rim.

Using a socket wrench, loosen these bolts until they are no longer tight but do not remove them completely just yet. Next, gently lift up the old tire until it comes free from the rim. Depending on how tightly it was installed, you may need another person’s help at this point.

Now take the new tire and line it up with the opening on the rim. Once again, depending on its size, you may need help getting it into place correctly. When lined up properly, start threading in each of those four bolts by hand before tightening them down with your socket wrench.

Be sure not to overtighten as this could strip out the threads or damage the bolt heads themselves beyond repair. Finally, lower your mobile home back down onto its newly installed tires and enjoy!

How Do You Mount a Trailer Tire at Home?

If you find yourself in a situation where you need to mount a trailer tire at home, there are a few things you’ll need to do. First, gather all the necessary materials. You’ll need a new tire, a lug wrench, and some patience.

Next, locate the bolts that hold the tire on the axle. You’ll need to remove these before you can proceed. Once they’re removed, slide the old tire off of the axle and set it aside.

Now it’s time to put the new tire on. Lift it up and line up the holes with the bolts on the axle. Once everything is lined up, start threading in the bolts by hand.

Once they’re all started, use your lug wrench to finish tightening them down. And that’s it! Now your trailer has a new tire mounted and you’re ready to hit the road again.

Can You Put Regular Tires on Mobile Home Rims?

If you have a mobile home and need to replace the tires, you may be wondering if you can put regular tires on the mobile home rims. The answer is yes, as long as the size of the tire is appropriate for the size of the rim. The width of the tire should be no more than 10 inches wider than the width of the mobile home rim.

The diameter of the tire should be no more than 1 inch larger than the diameter of the mobile home rim. If you have any questions about what size tire will fit your mobile home rim, it is best to consult with a professional at a tire or automotive store.

Can Mobile Home Tires Be Balanced?

Yes, mobile home tires can be balanced. This is typically done by a professional tire technician at a service station or tire dealership. The process involves mounting the tires on a balancing machine and adding weights to the outside of the rim until the tire is balanced.

This ensures that the weight of the tire is evenly distributed around the circumference of the wheel, which helps to extend the life of the tire and improve its performance.

Mobile home tire installation

Mobile Home Tires Near Me

If you’re in the market for mobile home tires, there are a few things to keep in mind. First, you’ll need to know the size of your tire. Mobile homes typically use a 14- or 15-inch tire.

You’ll also need to know the load capacity and speed rating of the tire. The load capacity is how much weight the tire can support, and the speed rating is how fast the tire can safely go. Once you have those numbers in mind, it’s time to start shopping around.

The best place to start your search is online. A quick Google search for “mobile home tires near me” will turn up a number of results. You can also check with your local RV dealer or automotive store – they may carry mobile home tires as well.

When comparing prices, be sure to compare apples to apples – make sure that the tires you’re looking at are the same size, load capacity, and speed rating as what you need. Once you’ve found a few options that meet your needs, it’s time to decide which one is right for you.


If you have a mobile home, you know that one of the most important parts of keeping it in good shape is making sure the tires are properly inflated and in good condition. If you’re not sure how to do this, don’t worry – we’ve got you covered. Here’s a quick guide on how to mount mobile home tires:

First, make sure that your mobile home is parked on level ground and that the brakes are set. Next, use a tire gauge to check the pressure in all four tires. If any of them are low, inflate them using an air compressor until they reach the proper pressure.

Once all four tires are properly inflated, it’s time to start mounting them onto the mobile home. Begin by attaching the front two tires, followed by the rear ones. Make sure that each tire is snugly in place and that there’s no chance of it coming loose or falling off while you’re driving.

Now that your mobile home tires are mounted and ready to go, be sure to check the pressure in them regularly (at least once a month) and inflate them as needed. This will help extend their lifespan and keep your mobile home running smoothly for years to come!

David V. Williamson

Click Here to Leave a Comment Below 0 comments