How to Tell the Age of Motorcycle Tires

The best way to determine the age of motorcycle tires is by looking at the DOT code on the sidewall of the tire. The DOT code is a series of numbers and letters that indicate when the tire was manufactured. The first two numbers in the DOT code represent the week of manufacture, and the last two numbers represent the year.

For example, if the DOT code on a tire reads “0417,” that means it was manufactured during the fourth week of 2017.

Debunking The Tire Age Myth | The Shop Manual

  • The following steps can be used to help determine the age of a motorcycle tire: 1
  • Check the sidewall of the tire for any raised lettering or numbers
  • These are usually date codes that will give you an indication of how old the tire is
  • Inspect the tread pattern on the tire
  • If there is little to no tread remaining, it is likely that the tire is quite old and should be replaced
  • Feel the surface of the tire
  • If it feels hard or brittle, this could also be a sign that the tire is old and needs to be replaced soon

Motorcycle Tire Age Limit

Tires are often one of the most neglected parts on a motorcycle, yet they’re also one of the most important. Tires are what keep you connected to the road, and they play a vital role in both your safety and your bike’s performance. So it’s important to choose the right tires for your bike, and to maintain them properly.

One thing that’s often overlooked is tire age. Just like with car tires, motorcycle tires have an expiration date. The rubber compound in tires degrades over time, even if they’re not being used.

And as tires get older, their grip diminishes and their ability to handle extreme temperatures decreases. That means old tires are more likely to fail when you need them most – in wet or icy conditions, or during sudden braking or cornering maneuvers. The general rule of thumb is to replace your motorcycle tires every five years, regardless of how much mileage they have on them.

If you don’t ride often, or if you only put a few hundred miles on your bike each year, it’s still a good idea to stick to this timeline. Of course, if you do a lot of riding in harsh conditions (like off-road riding or racing), then you may need to replace your tires more frequently. If you’re unsure about when your particular brand or model of tire was manufactured, there should be a four-digit code stamped on the sidewall that indicates the week and year – for example “1509” would mean the 15th week of 2009.

Once again, it’s best to err on the side of caution and assume that any tire over five years old needs to be replaced. So next time you go to buy new motorcycle tires , don’t just focus on choosing the right size and style for your bike – pay attention to the age of the tire too.

How to Tell the Age of Motorcycle Tires

Credit: www.utires.com

How Old Can Motorcycle Tires Be And Still Be Safe?

Motorcycle tires have a shelf life, and even if they’ve never been used, they can go bad. Here’s how to tell if your motorcycle tires are too old and need to be replaced. The first thing you need to do is check the date code on the tire.

This code will tell you when the tire was manufactured. Most tire manufacturers put a 4-digit code on their tires. The first two digits represent the week of manufacture, and the last two digits represent the year.

For example, a code of 1210 would mean that the tire was made in the 12th week of 2010. Once you know when the tire was made, you can figure out how old it is. If it’s more than 5 years old, it’s probably time to start shopping for new tires.

Even if your tires look fine on the outside, they could be deteriorating on the inside where you can’t see them. If you’re not sure how old your tires are or what kind of condition they’re in, it’s always best to err on the side of caution and get new ones. After all, your safety is worth more than any amount of money!

How Do You Read Motorcycle Tire Codes?

Motorcycle tire codes can be tricky to read, but with a little practice it’s not too difficult. The code is made up of numbers and letters that represent the width, height, aspect ratio, speed rating and construction of the tire. Here’s a quick breakdown of how to read motorcycle tire codes:

Width – The width is represented by the first two digits in the code and is measured in millimeters. For example, a 120/70 R17 tire has a width of 120 mm. Height – The height is represented by the second two digits in the code and is also measured in millimeters.

For example, a 120/70 R17 tire has a height of 70 mm. Aspect Ratio – The aspect ratio is represented by the third and fourth digits in the code and it represents the height of the sidewall as a percentage of the width. In our example above, the aspect ratio would be 70%, or 0.7 (height ÷ width).

A lower aspect ratio means a shorter sidewall, which results in better handling but less comfort. A higher aspect ratio means a taller sidewall, which results in more comfort but poorer handling. Speed Rating – The speed rating is represented by letter at the end of the code and indicates how fast you can safely go on that particular tire.

For example, an S-rated tire can handle speeds up to 112 mph (180 km/h), while an H-rated tire can handle speeds up to 130 mph (210 km/h). Construction – The construction type is indicated by either “R” for radial tires or “B” for bias-ply tires. Radial tires are more common these days as they offer better performance than bias-ply tires.

How Do I Tell the Age of My Tires?

If you’re not sure how old your tires are, there are a few things you can do to find out. First, check for the DOT code on the sidewall of the tire. This code will have four numbers followed by a two-letter code.

The first two numbers indicate the week of manufacture, while the last two show the year. For example, if the DOT code on your tire reads “1409,” this means that it was made in the 14th week of 2009. You can also tell how old a tire is by its tread depth.

Tires typically have around 10/32″ of tread when they’re brand new. You can measure tread depth using a tread depth gauge (available at most auto parts stores). If your tires have less than 4/32″ of tread remaining, they need to be replaced.

Are 8 Year Old Motorcycle Tires Safe?

It’s a common question: “Are 8 year old motorcycle tires safe?” The answer, unfortunately, is not a simple one. Motorcycle tires have a shelf life, and it’s important to pay attention to the age of your tires.

Here are some things to keep in mind when considering the safety of 8 year old motorcycle tires. First, consider the environment that the tire has been stored in. If the tire has been stored in a cool, dry place, it will likely be in better condition than a tire that has been stored in a hot, humid environment.

Second, look at the tread depth and overall condition of the tire. If there is significant wear or damage, it’s probably time to replace the tire. Third, check for cracks or other signs of deterioration in the sidewall of the tire.

These can be indications that the structure of the tire has been compromised and it may not be safe to ride on. If you’re unsure about whether or not your 8 year old motorcycle tires are safe, it’s best to err on the side of caution and replace them. Newer tires will provide better grip and handling, which can help you avoid accidents.

And while replacing tires may seem like a hassle (and an expense), it’s nothing compared to what could happen if you were to crash while riding on unsafe tires.

Conclusion

If you’re a motorcycle enthusiast, then you know that one of the most important parts of your bike is the tires. Not only do they affect how your motorcycle handles, but they also play a big role in safety. So, it’s important to know how to tell the age of motorcycle tires.

There are a few different ways to tell the age of motorcycle tires. One way is to look at the tread depth. As tires age, the tread depth will decrease.

You can also look for cracks or other signs of wear and tear. Finally, you can check the date code on the tire. This is usually stamped on the side wall of the tire and will tell you when the tire was manufactured.

With these tips, you’ll be able to tell how old your motorcycle tires are and whether or not they need to be replaced.

David V. Williamson
 

Click Here to Leave a Comment Below 0 comments

Leave a Reply: