How to Cut Fenders for Bigger Tires

Have you ever been driving down the road, minding your own business, when all of a sudden a huge puddle appears out of nowhere? Or maybe you hit a pot hole that was hidden by leaves and now your tire is shredded. These are just a few examples of why it might be necessary to cut your fenders.

If you have ever wondered how to cut fenders for bigger tires, then this blog post is for you!

  • Decide how much you want to cut off the fenders
  • This will depend on the size of the tires you are planning to install
  • Use a measuring tape to measure and mark where you will make your cuts
  • Cut along the lines you have marked, using a jigsaw or similar tool
  • Test fit your new tires to make sure they clear the newly cut fenders
  • If necessary, trim off more material until they fit properly

Cutting truck fenders (to make more tire clearance)

How Do I Cut My Truck for Bigger Tires?

There are a few different ways that you can go about cutting your truck for bigger tires. The most popular method is to simply cut the fenders. This will allow you to fit much larger tires on your truck without any rubbing or clearance issues.

Another way to achieve this is by installing body lift kits. This will raise the body of your truck up, giving you more room to fit larger tires. Keep in mind that both of these methods will require some additional work in order to maintain a clean and finished look.

How Do You Cut Inside Fenders?

Assuming you would like tips on how to cut inside fenders:One of the most difficult and tedious bodywork jobs is cutting out fender wells. It’s a job that’s often put off because it seems so daunting, but with the right tools and a little bit of patience, it’s not as bad as it looks.

Here are a few tips on how to cut inside fenders:-Start by removing any trim or molding that might be in the way. This will give you a clear area to work with.

-Use a razor knife or something similar to score along the line where you want to make your cut. This will help prevent the material from chipping or cracking when you start cutting. -Now it’s time for the power tools.

A small handheld circular saw is ideal for this job. Start by making shallow cuts along your scored line until you’ve gone all the way through the material. Be careful not to go too deep, or you’ll damage whatever is on the other side of the fender well.

-After you’ve made your initial cuts, switch to a jigsaw to finish up the job. This will allow you to make tighter turns and get into those hard-to-reach places. Again, be careful not to damage anything on the other side of the fender well.

How Do You Cut Front Fenders?

Assuming you mean how to cut and replace front fenders on a car:Removing the old fender is relatively easy, especially if it’s already been damaged. First, remove all of the bolts holding the fender in place.

There should be four bolts on the top of the fender near the hood, and two on each side near the door. Once these are removed, the fender should pull right off.Installing the new fender is a bit more difficult, but still not too complicated.

Start by lining up the new fender with the holes where the old one was attached. Once it’s in place, bolt it down using the same screws that held on the old fender. You may need to adjust it a bit to get everything lined up perfectly before tightening all of the bolts down.

Do You Need to Cut for Fender Flares?

If you’re looking to install fender flares on your vehicle, you might be wondering if you need to cut the factory fenders to do so. The good news is that in most cases, you won’t need to cut anything at all. Many fender flare kits come with hardware that bolts directly onto the existing fenders, making installation a breeze.

However, there are some circumstances where cutting may be necessary. If your vehicle has very wide tires, for example, or if you’re going for a particularly aggressive look, cutting the factory fenders may be the best way to go. Keep in mind that this will require more work and some specialized tools, so it’s not a decision to be made lightly.

But if you’re up for the challenge, it can definitely give your car a unique look.So there you have it – in most cases, no cutting is required when installing fender flares. But if you’ve got a specific vision for your car, don’t let that stop you from going for it!

How to Cut Fenders for Bigger Tires


Best Tool to Cut Fenders

If you’re looking to cut your fenders, there are a few things you’ll need to consider. What kind of car do you have? What is the make and model?

What year is it? These are important factors to think about when choosing the best tool to cut your fenders.There are a few different ways that you can go about cutting your fenders.

You can use a power drill, a sawzall, or even a Dremel tool. Each has its own advantages and disadvantages. The power drill will be the quickest way to get the job done, but it can be tricky to control and may cause more damage than necessary.

The sawzall will take longer, but it’s much more precise and won’t damage the surrounding area as much. The Dremel tool is somewhere in between, taking slightly longer than the power drill but being more precise than the sawzall.ultimately, it’s up to you which tool you use to cut your fenders.

Just make sure that you take into consideration what kind of car you have and what will work best for your particular situation.

Fender Roller

A fender roller is a tool that allows you to roll the fenders on your car. This can be helpful if you have installed new wheels and tires that are wider than the stock ones, or if you just want to give your car a more aggressive stance. Fender rolling is not difficult, but it does require some patience and attention to detail.

Here’s a step-by-step guide to help you get started.First, park your car on a level surface and engage the emergency brake. You’ll also want to remove any hubcaps or wheel covers so that you have clear access to the fender lip.

Next, use a tape measurer or ruler to mark the center of the fender lip. This will be your starting point.Now it’s time to start rolling the fender lip.

Begin at the center point that you marked earlier, and slowly work your way outwards. Use even pressure as you go, and try not to apply too much force – you don’t want to damage the paint or bodywork. As you reach the end of the fender lip, gently bend it downwards so that it sits flush with the tire.

Repeat this process on the other side of the car, and then take it for a test drive! With proper care and attention, rolled fenders can last for years without issue.

Fender Trimming near Me

If you’re looking for a great place to get your fender trimmed, look no further than your local body shop! Most body shops offer this service and can usually do it while you wait. This is a great way to improve the look of your car and make it stand out from the crowd.


If you’re looking to add some bigger tires to your ride, you’re going to need to cut the fenders. It’s not a difficult process, but there are a few things you’ll need to keep in mind. First, make sure you have the right tools for the job.

You’ll need a good pair of scissors and a sharp knife. Next, take your time and measure twice before you cut. Once you’ve made your cuts, test fit the tires to make sure everything looks good.

Finally, enjoy your new found clearance and go hit the trails!

David V. Williamson

Click Here to Leave a Comment Below 0 comments