How to Trim Fender Wells for Bigger Tires

Assuming you have already raised your suspension and installed bigger tires, the next step is to trim your fender wells. This will allow your new, larger tires to fit without rubbage. It’s a fairly simple process that anyone with basic automotive knowledge can do in their own driveway.

Here’s a quick overview of how to trim your fender wells for bigger tires.

  • If your car came with plastic fender flares, you’ll need to remove them before you can trim the metal fender well
  • Use a screwdriver or a drill to remove any screws holding the flare in place
  • Once the screws are removed, gently pull on the flares until they pop off
  • Next, use a measuring tape to measure how much material you need to remove from the fender well in order to accommodate your bigger tires
  • Mark this measurement on the fender well with a pencil or chalk so you know where to cut
  • Now it’s time to start cutting! Use a power drill with a metal cutting attachment to slowly and carefully cut along your marked line
  • Be sure not to cut too deeply or too close to the edge of the fender well, as this could weaken its structure
  • Once you’ve finished cutting, use a file or sandpaper to smooth down any rough edges around the newly trimmed opening
  • This will help prevent injuries and make your car look more polished overall
  • 5 Finally, reattach your plastic fender flares (if applicable) using the screws or bolts that held them in place originally
  • And that’s it—you’re ready to roll with your new larger tires!

Cutting truck fenders (to make more tire clearance)

How to Widen Wheel Wells

If you’re looking to widen your wheel wells, there are a few things you’ll need to do. First, you’ll need to measure the width of your current wheel wells. This will give you a good starting point for how much wider you’ll need to make them.

Next, you’ll need to determine what type of material you’ll be using to widen the wheel wells. There are a variety of options available, so it’s important to choose something that will work well with your vehicle and that will last for a long time.Once you’ve chosen your material, it’s time to start widening the wheel wells.

This is best done with a drill and some sort of saw or cutting tool. You’ll want to make sure that the new width is even all the way around, so take your time and measure as you go.Once thewheel wells are widened, it’s important to test them out before driving on them too much.

Take your car out for a spin around the block or down the street and see how they feel. If everything seems good, then enjoy your new found wideness!

How to Trim Fender Wells for Bigger Tires


How Do You Cut Wheel Wells for Bigger Tires?

If you’re looking to install bigger tires on your vehicle, you’ll need to make sure the wheel wells are properly cut out to accommodate the new size. Here’s a step-by-step guide on how to do just that:1. First, measure the width of the tire you’re planning on installing.

This will give you a good starting point for cutting out the wheel well.2. Next, use a marker or chalk to outline where you’ll need to cut. Make sure the outline is slightly larger than the tire itself so there’s no risk of the tire rubbing against the metal while driving.

3. Once you have your outline, use a power drill with a metal cutting attachment to start making holes along the perimeter of the circle. These holes will act as starting points for cutting out the actual wheel well.4. Now it’s time to start cutting out the wheel well itself.

You can use either a jigsaw or an angle grinder for this part – whichever you feel more comfortable with. Just be careful not to overcut – you want the final product to be slightly smaller than your tire so it fits snugly without any issues.5. Finally, smooth out any rough edges with a file or sandpaper and then give everything a quick wash down before installing your new tires!

How Do You Cut a Fender?

Assuming you mean a car’s fender:There are a few ways to cut a fender, but the most common is probably with a power saw. You’ll want to use a fine-tooth blade so that you don’t damage the paint on your car.

Another option is to use a rotary tool with a cutting disc, but this will take longer and isn’t as precise.If you’re not comfortable using power tools, you can always take it to a body shop and have them do it for you.

How Do You Enlarge a Wheel Well?

If you’re looking to enlarge a wheel well, there are a few different ways you can go about it. One option is to use body filler and then sand it down to create the desired shape. Another option is to use a Dremel tool to cut away at the plastic until you’ve achieved the desired look.

Whichever method you choose, make sure that you take your time and work carefully so that you don’t end up with an uneven or lumpy finish.

How Much Gap Should Be between Tires And Fenders?

Most cars have a gap of about an inch between the tires and fenders. This is to allow for some movement of the suspension and avoid rubbing of the tires on the fenders. If the gap is too small, it can cause the tires to rub when going over bumps or when turning.


If you’re looking to install bigger tires on your car or truck, you’ll need to trim the fender wells to avoid rubbing. Here’s a step-by-step guide on how to do it:1. Park your vehicle on a level surface and place jack stands under the frame to support it.

2. Remove the wheels and tires from your vehicle.3. Using a measuring tape, measure the distance from the edge of the tire well to the center of the wheel hub. Make a note of this measurement.

4. Using a marker or piece of chalk, draw a line around the circumference of each tire well at the point where you made your measurement in Step 3. This will be your cutting line.5. Using a power drill with a metal cutting bit, make small pilot holes along your cutting line. Be sure not to drill too deeply, as you don’t want to damage any vital components underneath the fender well (such as brake lines).

6. Once you’ve made pilot holes all around the circumference of each tire well, use a jigsaw with a metal cutting blade to cut along your marked lines. Be sure to go slowly and carefully so that you don’t accidentally cut too much material off or veer off course.

David V. Williamson

Click Here to Leave a Comment Below 0 comments